TM 5-3805-296-23-4
0238
REMOVAL CONTINUED
NOTE
Note orientation of tubes to aid in installation.
9. Loosen two tube nuts (Figure 4, Item 3) and remove tubes (Figure 4, Item 2) and O-rings (Figure 4, Item 7)
from elbow fittings (Figure 4, Item 6). Discard O-rings.
NOTE
Note orientation of elbow fitting to aid in installation.
10. Loosen two jam nuts (Figure 4, Item 5) and remove elbow fittings (Figure 4, Item 6) and O-rings (Figure 4,
Item 4) from hydraulic oil cooler (Figure 4, Item 1). Discard O-rings.
Figure 4. Hydraulic Oil Cooler Tubes.
0238
END OF TASK
CLEANING AND INSPECTION
000238
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK