TM 5-3805-296-23-4
0238
INSTALLATION CONTINUED
NOTE
Install P-clamp as noted during removal.
8. Install P-clamp (Figure 8, Item 5), washer (Figure 8, Item 3), bolt (Figure 8, Item 4), washer (Figure 8, Item 2)
and nut (Figure 8, Item 1) on machine.
NOTE
Refer to Removal for elbow fitting orientation.
9. Install new O-ring (Figure 8, Item 8), elbow fitting (Figure 8, Item 9) and tighten tube nut (Figure 8, Item 7) on
hydraulic oil cooler (Figure 8, Item 6).
10. Install new O-ring (Figure 8, Item 10), hose (Figure 8, Item 12) and tighten tube nut (Figure 8, Item 11) on
elbow fitting (Figure 8, Item 9).
Figure 8. Hydraulic Oil Cooler Hose.
0238
END OF TASK
FOLLOW-ON TASKS
000238
1. Raise crankcase guard (WP 0374).
2. Fill hydraulic oil (WP 0325).
3. Install grille (WP 0384).
4. Verify correct operation of machine (TM 5-3805-296-10).
END OF TASK
END OF WORK PACKAGE
0238-9/(10 blank)
