TM 5-3805-296-23-4
0238
REMOVAL CONTINUED
4. Loosen tube nut (Figure 2, Item 4) and remove hose (Figure 2, Item 3) and O-ring (Figure 2, Item 5) from elbow
fitting (Figure 2, Item 6). Discard O-ring.
NOTE
Note orientation of elbow fitting to aid in installation.
Note location of P-clamp to aid installation.
5. Loosen tube nut (Figure 2, Item 8) and remove elbow fitting (Figure 2, Item 6) and O-ring (Figure 2, Item 7)
from hydraulic oil cooler (Figure 2, Item 12). Discard O-ring.
6. Remove bolt (Figure 2, Item 11), washer (Figure 2, Item 10), nut (Figure 2, Item 2), washer (Figure 2, Item 1)
and P-clamp (Figure 2, Item 9) from machine.
Figure 2. Hydraulic Oil Cooler Hose.
0238