TM 5-3805-296-23-2
0145
Table 1. Right Front Turn Signal Does Not Operate Continued.
0145
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
If removed, install instrument panel
Right Front Turn Signal
cover (Figure 6, Item 3) with six
Does Not Operate
washers (Figure 6, Item 2) and bolts
Continued
(Figure 6, Item 1) on ROPS (Figure 6,
Item 4).
Proceed to Test Step 12.
Figure 6. Instrument Panel Cover and Retaining Hardware.
0145
Test Step 12. Test for Shorted Turn
Signal Wiring Harness.
1. Separate boot (Figure 7, Item 1)
from turn signal switch
(Figure 7, Item 2).
2. Disconnect terminal 606
(Figure 7, Item 4) from turn signal
switch terminal 2
(Figure 7, Item 3).
3. Using digital multimeter
Continuity Replace turn signal switch
(WP 0540), test for continuity
wiring harness (WP 0525).
between connector N-C1
Proceed to Test Step 13.
terminal 5 (WP 0012, Figure 264)
No Continuity Proceed to step 4.
and all other terminals in
connector N-C1
(WP 0012, Figure 264).
4. Using digital multimeter
Continuity Replace turn signal switch
(WP 0540), test for continuity
wiring harness (WP 0525).
between connector N-C1
Proceed to Test Step 13.
terminal 5 (WP 0012, Figure 264)
No Continuity Replace right front
and ground.
signal lamp (WP 0383).
Proceed to Test Step 13.