TM 5-3805-296-23-2
0145
Table 1. Right Front Turn Signal Does Not Operate Continued.
0145
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
9. Using digital multimeter
Right Front Turn Signal
Continuity Replace dash wiring
(WP 0540), test for continuity
Does Not Operate
harness (WP 0510).
between connector P-C2
Continued
Proceed to Test Step 13.
terminal 5 (WP 0012, Figure 265)
No Continuity Install right turn signal
and ground.
indicator on LED connector P-C25 and
connect connector to instrument panel
(Figure 4).
If removed, install instrument panel
(Figure 5, Item 3) with six bolts
(Figure 5, Item 4) on ROPS
(Figure 5, Item 5).
If removed, install right vent (Figure 5,
Item 7) with two bolts (Figure 5, Item 6)
on instrument panel (Figure 5, Item 3).
If removed, install left vent
(Figure 5, Item 2) with two bolts
(Figure 5, Item 1) on instrument panel
(Figure 5, Item 3).
Figure 5. Instrument Panel and Retaining Hardware.
0145