TM 5-3805-296-23-2
0122
Table 1. Automatic Ejector Return Function Will Not Operate or Fails To Turn Off
Automatically - Continued.
0122
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Automatic Ejector Return
Test Step 10. Test for Shorted Draft
Function Will Not Operate or
Frame and Bowl Side Wiring
Fails To Turn Off
Harness.
Automatically Continued
1. Disconnect connector AE-C1
(WP 0012, Figure 144) from
connector E-C2
(WP 0012, Figure 143).
2. Using digital multimeter
Continuity Replace draft frame and
(WP 0540), test for continuity
bowl side wiring harness (WP 0348).
between connector AE-C1
Proceed to Test Step 15.
terminal 11 (WP 0012, Figure 144)
No Continuity Proceed to step 3.
and all other terminals in
connector AE-C1
(WP 0012, Figure 144).
3. Using digital multimeter
Continuity Replace draft frame and
(WP 0540), test for continuity
bowl side wiring harness (WP 0348).
between connector AE-C1
Proceed to Test Step 15.
terminal 11 (WP 0012, Figure 144)
No Continuity Proceed to Test
and ground.
Step 11.
Test Step 11. Test for Shorted Hitch
Wiring Harness.
1. Lower left frame access plate
(WP 0376).
2. Disconnect connector E-C1
(WP 0012, Figure 140) from
connector W-C3
(WP 0012, Figure 139).
3. Using digital multimeter
Continuity Replace hitch wiring
(WP 0540), test for continuity
harness (WP 0401).
between connector E-C2
Proceed to Test Step 15.
terminal 11(WP 0012, Figure 143)
No Continuity Proceed to step 4.
and all other terminals in
connector E-C2
(WP 0012, Figure 143).
4. Using digital multimeter
Continuity Replace hitch wiring
(WP 0540), test for continuity
harness (WP 0401).
between connector E-C2
Proceed to Test Step 15.
terminal 11 (WP 0012, Figure 143)
No Continuity Proceed to Test
and ground.
Step 12.
Test Step 12. Test for Shorted Main
Cab Wiring Harness.
1. Disconnect connector W-C12
(WP 0012, Figure 88) from
transmission/chassis ECM.
2. Disconnect connector W-C13
(WP 0012, Figure 89) from
transmission/chassis ECM.
0122-11
