TM 5-3805-296-23-2
0122
Table 1. Automatic Ejector Return Function Will Not Operate or Fails To Turn Off
Automatically - Continued.
0122
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Automatic Ejector Return
5. On MSD, select Status Group #12
Status Displays Closed Proceed to
Function Will Not Operate or
(Figure 6, Item 1) and view Ejector
Test Step 9.
Fails To Turn Off
Cylinder Head End Pressure
Status Displays Open Proceed to
Automatically Continued
Switch status (Figure 6, Item 2).
Test Step 13.
Figure 6. Selecting Status Group #12.
0122
Test Step 9. Test for Shorted
Implement Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector F-C8
(WP 0012, Figure 146) from
connector AE-C5
(WP 0012, Figure 145).
3. Using digital multimeter
Continuity Replace implement wiring
(WP 0540), test for continuity
harness (WP 0349).
between connector F-C8
Proceed to Test Step 15.
terminal 11 (WP 0012, Figure 146)
No Continuity Proceed to step 4.
and all other terminals in
connector F-C8 (WP 0012,
Figure 146).
4. Using digital multimeter
Continuity Replace implement wiring
(WP 0540), test for continuity
harness (WP 0349).
between connector F-C8
Proceed to Test Step 15.
terminal 11 (WP 0012, Figure 146)
No Continuity Proceed to Test
and ground.
Step 10.