TM 5-3805-296-23-2
0094
Table 1. 0177 Transmission Oil Temperature Sensor Diagnostic Code - Continued.
0094
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0177-08 Transmission Oil
Temperature Sensor
Abnormal Frequency, Pulse
Width, or Period
Continued
Figure 9. Cab Step.
0094
2. Inspect ground point of main cab
Ground Point or Ring Terminal Dirty
wiring harness (WP 0012,
or Corroded Clean as necessary.
Figure 316) for dirt, corrosion, and
Proceed to Test Step 16.
damage.
Ring Terminal Defective Replace
main cab wiring harness (WP 0505).
Proceed to Test Step 16.
No Problem Found Install main cab
wiring harness on ground point
(WP 0505). Proceed to Test Step 12.
Test Step 12. Test Main Cab Wiring
Harness for High Resistance or
Open.
Resistance 5.0 Ohms or Less
Using digital multimeter (WP 0540),
Proceed to Test Step 16.
measure resistance between
Resistance Greater Than 5.0 Ohms
connector W-C16 terminal 13
Replace main cab wiring harness
(WP 0012, Figure 87) and ground.
(WP 0505).
Proceed to Test Step 16.