TM 5-3805-296-23-2
0094
Table 1. 0177 Transmission Oil Temperature Sensor Diagnostic Code - Continued.
0094
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0177-08 Transmission Oil
Test Step 13. Test Engine Interface
Temperature Sensor
Wiring Harness for High Resistance
Abnormal Frequency, Pulse
or Open.
Width, or Period
1. Turn ignition switch and battery
Continued
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector W-C16
(WP 0012, Figure 87) from
connector CL-C3
(WP 0012, Figure 86).
3. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to Test Step 14.
between connector CL-C13
Resistance Greater Than 5.0 Ohms
terminal C (WP 0012, Figure 59)
Replace engine interface wiring
and connector CL-C3 terminal 8
harness (WP 0211).
(WP 0012, Figure 86).
Proceed to Test Step 16.
Test Step 14. Test Main Cab Wiring
Harness for High Resistance or
Open.
1. Remove upper and lower plenum
from ROPS (WP 0504).
2. Disconnect connector P-C1
(WP 0012, Figure 253) from
connector W-C7
(WP 0012, Figure 252).
3. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to Test Step 15.
between connector W-C16
Resistance Greater Than 5.0 Ohms
terminal 8 (WP 0012, Figure 87)
Replace main cab wiring harness
and connector W-C7 terminal 12
(WP 0505).
(WP 0012, Figure 252).
Proceed to Test Step 16.
Test Step 15. Test Dash Wiring
Harness for High Resistance or
Open.
1. Remove six bolts
(Figure 10, Item 1), washers
(Figure 10, Item 2), and instrument
panel cover (Figure 10, Item 3)
from ROPS (Figure 10, Item 4).
0094-16
