TM 5-3805-296-23-2
0094
Table 1. 0177 Transmission Oil Temperature Sensor Diagnostic Code - Continued.
0094
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0177-08 Transmission Oil
6. Using digital multimeter
Resistance 5.0 Ohms or Less
Temperature Sensor
(WP 0540), measure resistance
Replace tractor operator monitor
Abnormal Frequency, Pulse
between connector P-C1
(WP 0506).
Width, or Period
terminal 9 (WP 0012, Figure 253)
Proceed to Test Step 16.
Continued
and connector P-C18 terminal 24
Resistance Greater Than 5.0 Ohms
(WP 0012, Figure 269).
Replace dash wiring harness
(WP 0510).
Proceed to Test Step 16.
Test Step 10. Test Engine Interface
Wiring Harness for High Resistance
or Open.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector W-C16
(WP 0012, Figure 87) from
connector CL-C3
(WP 0012, Figure 86).
3. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to Test Step 11.
between connector CL-C13
Resistance Greater Than 5.0 Ohms
terminal B (WP 0012, Figure 59)
Replace engine interface wiring
and connector CL-C3 terminal 13
harness (WP 0211).
(WP 0012, Figure 86).
Proceed to Test Step 16.
Test Step 11. Inspect Ground Point
of Main Cab Wiring Harness.
1. Remove six bolts
(Figure 9, Item 1), washers
(Figure 9, Item 2), and step
(Figure 9, Item 3) from cab
(Figure 9, Item 4).
0094-14