TM 5-3805-296-23-2
0094
Table 1. 0177 Transmission Oil Temperature Sensor Diagnostic Code - Continued.
0094
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0177-08 Transmission Oil
2. Remove two bolts
Temperature Sensor
(Figure 11, Item 1) and left vent
Abnormal Frequency, Pulse
(Figure 11, Item 2) from instrument
Width, or Period
panel (Figure 11, Item 3).
Continued
3. Remove two bolts (Figure 11,
Item 6) and right vent (Figure 11,
Item 7) from instrument panel
(Figure 11, Item 3).
4. Remove six bolts
(Figure 11, Item 4) from instrument
panel (Figure 11, Item 3) and
ROPS (Figure 11, Item 5). Position
instrument panel to access
connector P-C18
(WP 0012, Figure 269).
Figure 11. Instrument Panel and Retaining Hardware.
0094
5. Disconnect connector P-C18
(WP 0012, Figure 269) from tractor
operator monitor.
6. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Replace tractor operator monitor
between connector P-C1
(WP 0506).
terminal 12 (WP 0012, Figure 253)
Proceed to Test Step 16.
and connector P-C18 terminal 8
Resistance Greater Than 5.0 Ohms
(WP 0012, Figure 269).
Replace dash wiring harness
(WP 0510).
Proceed to Test Step 16.