TM 5-3805-296-23-2
0094
Table 1. 0177 Transmission Oil Temperature Sensor Diagnostic Code - Continued.
0094
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0177-08 Transmission Oil
Test Step 8. Test Main Cab Wiring
Temperature Sensor
Harness for High Resistance or
Abnormal Frequency, Pulse
Open.
Width, or Period
1. Remove upper and lower plenum
Continued
from ROPS (WP 0504).
2. Disconnect connector P-C1
(WP 0012, Figure 253) from
connector W-C7
(WP 0012, Figure 252).
3. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to Test Step 9.
between connector W-C16
Resistance Greater Than 5.0 Ohms
terminal 7 (WP 0012, Figure 87)
Replace main cab wiring harness
and connector W-C7 terminal 9
(WP 0505).
(WP 0012, Figure 252).
Proceed to Test Step 16.
Test Step 9. Test Dash Wiring
Harness for High Resistance or
Open.
1. Remove six bolts
(Figure 7, Item 1), washers
(Figure 7, Item 2), and instrument
panel cover (Figure 7, Item 3) from
ROPS (Figure 7, Item 4).
Figure 7. Instrument Panel Cover and Retaining Hardware.
0094
