TM 5-3805-296-23-2
0093
Table 1. 0096 Fuel Level Sensor Diagnostic Code Continued.
093
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 5. Test for Shorted Chassis
0096-03 Fuel Level Sensor
Wiring Harness.
Voltage Above Normal
1. Disconnect connector J-C8
Continued
(WP 0012, Figure 100) from
connector W-C1
(WP 0012, Figure 99).
2. Using digital multimeter
Continuity Replace chassis wiring
(WP 0540), test for continuity
harness (WP 0305).
between connector J-C6
Proceed to Test Step 17.
terminal 27 (WP 0012, Figure 141)
No Continuity Proceed to step 3.
and all other terminals in
connector J-C6
(WP 0012, Figure 141).
3. Using digital multimeter
Continuity Replace chassis wiring
(WP 0540), test for continuity
harness (WP 0305).
between connector J-C8
Proceed to Test Step 17.
terminal 12 (WP 0012, Figure 100)
No Continuity Proceed to Test
and all other terminals in
Step 6.
connector J-C8
(WP 0012, Figure 100).
Test Step 6. Test for Shorted Main
Cab Wiring Harness.
1. Remove upper and lower plenum
from ROPS (WP 0504).
2. Disconnect connector P-C1
(WP 0012, Figure 253) from
connector W-C7
(WP 0012, Figure 252).
3. Using digital multimeter
Continuity Replace main cab wiring
(WP 0540), test for continuity
harness (WP 0505).
between connector W-C1
Proceed to Test Step 17.
terminal 12 (WP 0012, Figure 99)
No Continuity Proceed to step 4.
and all other terminals in
connector W-C1
(WP 0012, Figure 99).
4. Using digital multimeter
Continuity Replace main cab wiring
(WP 0540), test for continuity
harness (WP 0505).
between connector W-C7
Proceed to Test Step 17.
terminal 11 (WP 0012, Figure 252)
No Continuity Proceed to Test
and all other terminals in
Step 7.
connector W-C7
(WP 0012, Figure 252).
0093-5
