TM 5-3805-296-23-2
0093
Table 1. 0096 Fuel Level Sensor Diagnostic Code Continued.
093
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 2. Test for Shorted Push
0096-03 Fuel Level Sensor
Frame Wiring Harness.
Voltage Above Normal
1. Turn ignition switch and battery
Continued
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector AF-C1
(WP 0012, Figure 164) from
connector AE-C2 (WP 0012,
Figure 163).
3. Using digital multimeter
Continuity Replace push frame
(WP 0540), test for continuity
wiring harness (WP 0347).
between connector AF-C1
Proceed to Test Step 17.
terminal 5 (WP 0012, Figure 164)
No Continuity Proceed to Test
and all other terminals in
Step 3.
connector AF-C1 (WP 0012,
Figure 164).
Test Step 3. Test for Shorted Draft
Frame and Bowl Side Wiring
Harness.
1. Disconnect connector AE-C1
(WP 0012, Figure 144) from
connector E-C2
(WP 0012, Figure 143).
2. Using digital multimeter
Continuity Replace draft frame and
(WP 0540), test for continuity
bowl side wiring harness (WP 0280).
between connector AE-C2
Proceed to Test Step 17.
terminal 5 (WP 0012, Figure 163)
No Continuity Proceed to step 3.
and all other terminals in
connector AE-C2
(WP 0012, Figure 163).
3. Using digital multimeter
Continuity Replace draft frame and
(WP 0540), test for continuity
bowl side wiring harness (WP 0280).
between connector AE-C1
Proceed to Test Step 17.
terminal 17 (WP 0012, Figure 144)
No Continuity Proceed to Test
and all other terminals in
Step 4.
connector AE-C1
(WP 0012, Figure 144).
0093-3
