TM 5-3805-296-23-2
0093
Table 1. 0096 Fuel Level Sensor Diagnostic Code Continued.
093
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 4. Test for Shorted Hitch
0096-03 Fuel Level Sensor
Wiring Harness.
Voltage Above Normal
1. Lower left frame access plate
Continued
(WP 0376).
2. Remove four bolts
(Figure 1, Item 1), washers
(Figure 1, Item 2), bushings
(Figure 1, Item 3), and splash
shield (Figure 1, Item 4) from
machine.
Figure 1. Splash Shield and Retaining Hardware.
0093
3. Disconnect connector E-C3
(WP 0012, Figure 142) from
connector J-C6
(WP 0012, Figure 141).
4. Using digital multimeter
Continuity Replace hitch wiring
(WP 0540), test for continuity
harness (WP 0401).
between connector E-C2
Proceed to Test Step 17.
terminal 17 (WP 0012, Figure 143)
No Continuity Proceed to step 5.
and all other terminals in
connector E-C2
(WP 0012, Figure 143).
5. Using digital multimeter
Continuity Replace hitch wiring
(WP 0540), test for continuity
harness (WP 0401).
between connector E-C3
Proceed to Test Step 17.
terminal 27 (WP 0012, Figure 142)
No Continuity Proceed to Test
and all other terminals in
Step 5.
connector E-C3 (WP 0012,
Figure 142).