TM 5-3805-296-23-2
0071
Table 1. 1276 Bowl Down Proportional Solenoid Diagnostic Codes Continued.
071
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 4. Test for Shorted Hitch
1276-06 Bowl Down
Wiring Harness.
Solenoid Current Above
1. Lower left frame access plate
Normal Continued
(WP 0376).
2. Remove four bolts
(Figure 12, Item 1), washers
(Figure 12, Item 2), bushings
(Figure 12, Item 3), and splash
shield (Figure 12, Item 4) from
machine.
Figure 12. Splash Shield and Retaining Hardware.
0071
3. Disconnect connector E-C1
(WP 0012, Figure 140)
from connector W-C3
(WP 0012, Figure 139).
4. Using digital multimeter
Continuity Replace hitch wiring
(WP 0540), test for continuity
harness (WP 0401).
between connector E-C2
Proceed to Test Step 6.
terminal 7 (WP 0012, Figure 143)
No Continuity Proceed to step 5.
and all other terminals
in connector E-C2
(WP 0012, Figure 143).
5. Using digital multimeter
Continuity Replace hitch wiring
(WP 0540), test for continuity
harness (WP 0401).
between connector E-C2
Proceed to Test Step 6.
terminal 7 (WP 0012, Figure 143)
No Continuity Proceed to Test
and ground.
Step 5.
