TM 5-3805-296-23-1
0064
Table 1. 0700 Transmission Gear Position Sensor Diagnostic Codes Continued.
064
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 17. Verify if Code is Still
0700-02 Transmission Gear
Active.
Sensor Erratic, Intermittent,
1. Connect connector W-C12
or Incorrect Continued
(WP 0012, Figure 88) to
transmission/chassis ECM.
2. Connect connector J-C8
(WP 0012, Figure 100)
to connector W-C1
(WP 0012, Figure 99).
3. Connect connector A-C1
(WP 0012, Figure 106)
to connector J-C3
(WP 0012, Figure 101).
4. Connect connector AG-C1
(WP 0012, Figure 120) to tractor
actual gear switch connector
(WP 0012, Figure 119) (WP 0273).
5. Turn battery disconnect switch to
ON position, start engine, depress
brake pedal, and move gear shift
lever into each gear position and
then back to neutral
(TM 5-3805-296-10).
6. At MSD, check for active
700-2 Transmission Gear Sensor
diagnostic code 700-2
Erratic, Intermittent, or Incorrect
Transmission Gear Sensor Erratic,
Becomes Inactive Proceed to step 7.
Intermittent, or Incorrect
700-2 Transmission Gear Sensor
Erratic, Intermittent, or Incorrect
Remains Active Replace
transmission/chassis ECM (WP 0495).
Proceed to Test Step 20.
7. Install tractor actual gear switch
housing (WP 0273).
8. Troubleshooting complete.
0064-25