TM 5-3805-296-23-1
0064
Table 1. 0700 Transmission Gear Position Sensor Diagnostic Codes Continued.
064
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
e. Connect jumper wire
0700-02 Transmission Gear
between terminal 34 and
Sensor Erratic, Intermittent,
35 of connector J-C8
or Incorrect Continued
(WP 0012, Figure 100) and
measure resistance between
connector J-C3 terminal 25
and terminal 26
(WP 0012, Figure 101).
f.
Remove jumper wire from
terminal 34 and 35 of
connector J-C8 (WP 0012,
Figure 100).
g. Connect jumper wire between
terminal 5 and 34 of connector
J-C8 (WP 0012, Figure 100)
and measure resistance
between connector J-C3
terminal 18 and terminal 25
(WP 0012, Figure 101).
h. Remove jumper wire from
terminal 5 and 34 of connector
J-C8 (WP 0012, Figure 100).
0064-23
