TM 5-3805-296-23-1
0041
Table 1. 2417 Start Aid Diagnostic Codes Continued.
041
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
2417-06 Ether Injection
Test Step 5. Test for Shorted Engine
Control Solenoid Current
Interface Wiring Harness.
1. Lower left frame access plate
Above Normal Continued
(WP 0376).
2. Remove four bolts
(Figure 3, Item 1), washers
(Figure 3, Item 2), bushings
(Figure 3, Item 3), and splash
shield (Figure 3, Item 4) from
machine.
Figure 3. Splash Shield and Retaining Hardware.
0041
3. Disconnect connector CM-C1
(WP 0012, Figure 30) from engine
ECM.
4. Disconnect connector CL-C1
(WP 0012, Figure 45) from engine
ECM.
5. Using digital multimeter
Continuity Replace engine interface
(WP 0540), test for continuity
wiring harness (WP 0211).
between connector CL-C3
Proceed to Test Step 6.
terminal 30 (WP 0012, Figure 86)
No Continuity Proceed to step 6.
and all other terminals
in connector CL-C3
(WP 0012, Figure 86).
6. Using digital multimeter
Continuity Replace engine interface
(WP 0540), test for continuity
wiring harness (WP 0211).
between connector CL-C1
Proceed to Test Step 6.
terminal 20 (WP 0012, Figure 45)
No Continuity Proceed to step 7.
and all other terminals
in connector CL-C1
(WP 0012, Figure 45).