TM 5-3805-296-23-1
0041
Table 1. 2417 Start Aid Diagnostic Codes Continued.
041
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
2417-06 Ether Injection
Test Step 2. Test for Shorted Hood
Control Solenoid Current
Wiring Harness.
Above Normal Continued
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector L-C1
(WP 0012, Figure 190)
from connector J-C2
(WP 0012, Figure 189).
3. Using digital multimeter
Continuity Replace hood wiring
(WP 0540), test for continuity
harness (WP 0389).
between connector L-C1
Proceed to Test Step 6.
terminal 8 (WP 0012, Figure 190)
No Continuity Proceed to step 4.
and all other terminals
in connector L-C1
(WP 0012, Figure 190).
4. Using digital multimeter
Continuity Replace hood wiring
(WP 0540), test for continuity
harness (WP 0389).
between connector L-C1
Proceed to Test Step 6.
terminal 8 (WP 0012, Figure 190)
No Continuity Proceed to Test
and ground.
Step 3.
Test Step 3. Test for Shorted Chassis
Wiring Harness.
1. Disconnect connector J-C8
(WP 0012, Figure 100)
from connector W-C1
(WP 0012, Figure 99).
2. Using digital multimeter
Continuity Replace chassis wiring
(WP 0540), test for continuity
harness (WP 0305).
between connector J-C2 terminal 8
Proceed to Test Step 6.
(WP 0012, Figure 189) and all
No Continuity Proceed to step 3.
other terminals in connector J-C2
(WP 0012, Figure 189).
3. Using digital multimeter
Continuity Replace chassis wiring
(WP 0540), test for continuity
harness (WP 0305).
between connector J-C8
Proceed to Test Step 6.
terminal 66 (WP 0012, Figure 100)
No Continuity Proceed to step 4.
and all other terminals
in connector J-C8
(WP 0012, Figure 100).
4. Using digital multimeter
Continuity Replace chassis wiring
(WP 0540), test for continuity
harness (WP 0305).
between connector J-C8
Proceed to Test Step 6.
terminal 66 (WP 0012, Figure 100)
No Continuity Proceed to Test
and ground.
Step 4.
0041-9