TM 5-3805-296-23-1
0041
Table 1. 2417 Start Aid Diagnostic Codes Continued.
041
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 6. Test Engine Interface
2417-05 Ether Injection
Wiring Harness for High Resistance
Control Solenoid Current
or Open.
Below Normal Continued
1. Lower left frame access plate
(WP 0376).
2. Remove four bolts
(Figure 1, Item 1), washers
(Figure 1, Item 2), bushings
(Figure 1, Item 3), and splash
shield (Figure 1, Item 4) from
machine.
Figure 1. Splash Shield and Retaining Hardware.
0041
3. Disconnect connector CL-C1
(WP 0012, Figure 45) from engine
ECM.
4. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Replace engine ECM (WP 0252).
between connector CL-C1
Proceed to Test Step 10.
terminal 20 (WP 0012, Figure 45)
Resistance Greater Than 5.0 Ohms
and connector CL-C3
Replace engine interface wiring
(WP 0012, Figure 86)
harness (WP 0211).
terminal 30.
Proceed to Test Step 10.