TM 5-3805-296-23-1
0023
Table 1. 0110 Engine Coolant Temperature Sensor Diagnostic Codes Continued.
023
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0110-03 Engine Coolant
Test Step 2. Test for Shorted Basic
Temperature Sensor Voltage
Engine Wiring Harness.
Above Normal or Engine
1. Turn ignition switch and battery
Coolant Temperature
disconnect switch to OFF position
Parameter Is 40
(TM 5-3805-296-10).
Continued
2. Lower left frame access plate
(WP 0376).
3. Remove four bolts
(Figure 1, Item 1), washers
(Figure 1, Item 2), bushings
(Figure 1, Item 3), and splash
shield (Figure 1, Item 4) from
machine.
Figure 1. Splash Shield and Retaining Hardware.
0023
4. Disconnect connector CL-C1
(WP 0012, Figure 45) from engine
ECM.
5. Disconnect connector CM-C1
(WP 0012, Figure 30) from engine
ECM.
6. Using digital multimeter
Continuity Replace basic engine
(WP 0540), test for continuity
wiring harness (WP 0251).
between connector CM-C1
Proceed to Test Step 5.
terminal 13 (WP 0012, Figure 30)
No Continuity Proceed to step 7.
and all other terminals
in connector CM-C1
(WP 0012, Figure 30).