TM 5-3805-296-23-1
0023
Table 1. 0110 Engine Coolant Temperature Sensor Diagnostic Codes Continued.
023
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0110-04 Engine Coolant
8. Using digital multimeter
Continuity Replace basic engine
Temperature Sensor Voltage
(WP 0540), test for continuity
wiring harness (WP 0251).
Below Normal Continued
between connector CM-C1
Proceed to Test Step 3.
terminal 13 (WP 0012, Figure 30)
No Continuity Replace engine ECM
and ground.
(WP 0252).
Proceed to Test Step 3.
Test Step 3. Verify Malfunction is
Resolved.
1. Ensure all harness connectors are
connected.
2. At MSD, check for active
110-4 Engine Coolant Temperature
diagnostic codes (WP 0008).
Sensor Voltage Below Normal
Becomes Inactive Troubleshooting
complete.
110-4 Engine Coolant Temperature
Sensor Voltage Below Normal
Remains Active Repeat
troubleshooting from the beginning.
3. If removed, install splash shield
(Figure 4, Item 4), four bushings
(Figure 4, Item 3), washers
(Figure 4, Item 2), and bolts
(Figure 4, Item 1) on machine.
Figure 4. Splash Shield and Retaining Hardware.
0023
4. If lowered, install left frame access
plate (WP 0376).
5. Troubleshooting complete.
END OF WORK PACKAGE
