TM 5-3805-296-23-1
0022
Table 1. 0100 Engine Oil Pressure Sensor Diagnostic Codes Continued.
022
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
3. Disconnect connector CM-C1
0100-04 Engine Oil Pressure
(WP 0012, Figure 30) from engine
Sensor Voltage Below
ECM.
Normal Continued
4. Using digital multimeter
Continuity Replace basic engine
(WP 0540), test for continuity
wiring harness (WP 0251).
between connector CM-C1
Proceed to Test Step 4.
terminal 28 (WP 0012, Figure 30)
No Continuity Proceed to step 5.
and all other terminals
in connector CM-C1
(WP 0012, Figure 30).
5. Using digital multimeter
Continuity Replace basic engine
(WP 0540), test for continuity
wiring harness (WP 0251). Replace
between connector CM-C1
engine interface wiring harness
terminal 28 (WP 0012, Figure 30)
(WP 0211).
and all terminals in connector
Proceed to Test Step 4.
CL-C1 (WP 0012, Figure 45).
No Continuity Proceed to step 6.
6. Using digital multimeter
Continuity Replace basic engine
(WP 0540), test for continuity
wiring harness (WP 0251).
between connector CM-C1
Proceed to Test Step 4.
terminal 28 (WP 0012, Figure 30)
No Continuity Replace engine ECM
and ground.
(WP 0252).
Proceed to Test Step 4.
0022-9