TM 5-3805-296-23-1
0021
Table 1. 0094 Fuel Pressure Sensor Diagnostic Codes Continued.
021
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0094-04 Fuel Pressure
Test Step 6. Verify Malfunction is
Sensor Voltage Below
Resolved.
Normal or Fuel Pressure
1. Ensure all harness connectors are
94-4 Fuel Pressure Sensor Voltage
Parameter Is 0 with Engine
connected.
Below Normal Becomes Inactive or
Running Continued
2. At MSD, check for active
Fuel Pressure Parameter Other Than
diagnostic codes (WP 0008).
0 with Engine Running
Troubleshooting complete.
94-4 Fuel Pressure Sensor Voltage
Below Normal Remains Active or
Fuel Pressure Parameter Remains 0
with Engine Running Repeat
troubleshooting from the beginning.
3. If removed, install splash shield
(Figure 4, Item 4), four bushings
(Figure 4, Item 3), washers
(Figure 4, Item 2), and bolts
(Figure 4, Item 1) on machine.
Figure 4. Splash Shield and Retaining Hardware.
0021
4. If lowered, install left frame access
plate (WP 0376).
5. Troubleshooting complete.
END OF WORK PACKAGE