TM 5-3805-296-23-1
0021
Table 1. 0094 Fuel Pressure Sensor Diagnostic Codes Continued.
021
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0094-04 Fuel Pressure
Test Step 4. Test for Shorted Engine
Sensor Voltage Below
Interface Wiring Harness.
Normal or Fuel Pressure
1. Disconnect connector CL-C10
Parameter Is 0 with Engine
(WP 0012, Figure 32)
Running Continued
from connector CM-C11
(WP 0012, Figure 31).
2. Using digital multimeter
Continuity Replace engine interface
(WP 0540), test for continuity
wiring harness (WP 0211).
between connector CL-C9
Proceed to Test Step 6.
terminal 5 (WP 0012, Figure 33)
No Continuity Proceed to step 3.
and all other terminals
in connector CL-C9
(WP 0012, Figure 33).
3. Using digital multimeter
Continuity Replace engine interface
(WP 0540), test for continuity
wiring harness (WP 0211).
between connector CL-C9
Proceed to Test Step 6.
terminal 5 (WP 0012, Figure 33)
No Continuity Proceed to Test
and ground.
Step 5.
Test Step 5. Test for Shorted Basic
Engine Wiring Harness.
1. Lower left frame access plate
(WP 0376).
2. Remove four bolts
(Figure 3, Item 1), washers
(Figure 3, Item 2), bushings
(Figure 3, Item 3), and splash
shield (Figure 3, Item 4) from
machine.
Figure 3. Splash Shield and Retaining Hardware.
0021