TM 5-3805-296-23-1
0021
Table 1. 0094 Fuel Pressure Sensor Diagnostic Codes Continued.
021
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0094-04 Fuel Pressure
3. Disconnect connector CL-C1
Sensor Voltage Below
(WP 0012, Figure 45) from engine
Normal or Fuel Pressure
ECM.
Parameter Is 0 with Engine
4. Disconnect connector CM-C1
Running Continued
(WP 0012, Figure 30) from engine
ECM.
5. Using digital multimeter
Continuity Replace basic engine
(WP 0540), test for continuity
wiring harness (WP 0251).
between connector CM-C11
Proceed to Test Step 6.
terminal 7 (WP 0012, Figure 31)
No Continuity Proceed to step 6.
and all other terminals
in connector CM-C11
(WP 0012, Figure 31).
6. Using digital multimeter
Continuity Replace basic engine
(WP 0540), test for continuity
wiring harness (WP 0251).
between connector CM-C1
Proceed to Test Step 6.
terminal 40 (WP 0012, Figure 30)
No Continuity Proceed to step 7.
and all other terminals
in connector CM-C1
(WP 0012, Figure 30).
7. Using digital multimeter
Continuity Replace basic engine
(WP 0540), test for continuity
wiring harness (WP 0251). Replace
between connector CM-C1
engine interface wiring harness
terminal 40 (WP 0012, Figure 30)
(WP 0211).
and all terminals in connector
Proceed to Test Step 6.
CL-C1 (WP 0012, Figure 45).
No Continuity Proceed to step 8.
8. Using digital multimeter
Continuity Replace basic engine
(WP 0540), test for continuity
wiring harness (WP 0251).
between connector CM-C1
Proceed to Test Step 6.
terminal 40 (WP 0012, Figure 30)
No Continuity Replace engine ECM
and ground.
(WP 0252).
Proceed to Test Step 6.
0021-13