TM 5-3805-296-23-1
0021
Table 1. 0094 Fuel Pressure Sensor Diagnostic Codes Continued.
021
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 4. Test Basic Engine
0094-03 Fuel Pressure
Wiring Harness for High Resistance
Sensor Voltage Above
or Open.
Normal Continued
1. Remove jumper wire from
terminal 3 and terminal 4 of
connector CL-C9
(WP 0012, Figure 33).
2. Connect jumper wire between
terminal 5 and terminal 6
of connector CM-C11
(WP 0012, Figure 31).
3. Lower left frame access plate
(WP 0376).
4. Remove four bolts
(Figure 1, Item 1), washers
(Figure 1, Item 2), bushings
(Figure 1, Item 3), and splash
shield (Figure 1, Item 4) from
machine.
Figure 1. Splash Shield and Retaining Hardware.
0021