TM 5-3805-296-23-1
0021
Table 1. 0094 Fuel Pressure Sensor Diagnostic Codes Continued.
021
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 7. Test for Shorted Engine
0094-03 Fuel Pressure
Interface Wiring Harness.
Sensor Voltage Above
1. Disconnect connector CL-C10
Normal Continued
(WP 0012, Figure 32)
from connector CM-C11
(WP 0012, Figure 31).
2. Using digital multimeter
Continuity Replace engine interface
(WP 0540), test for continuity
wiring harness (WP 0211).
between connector CL-C9
Proceed to Test Step 13.
terminal 5 (WP 0012, Figure 33)
No Continuity Proceed to
and all other terminals in
Test Step 8.
connector CL-C9
(WP 0012, Figure 33).
Test Step 8. Test for Shorted Basic
Engine Wiring Harness.
1. Disconnect connector CL-C1
(WP 0012, Figure 45) from engine
ECM.
2. Disconnect connector CM-C1
(WP 0012, Figure 30) from engine
ECM.
3. Using digital multimeter
Continuity Replace basic engine
(WP 0540), test for continuity
wiring harness (WP 0251).
between connector CM-C11
Proceed to Test Step 13.
terminal 7 (WP 0012, Figure 31)
No Continuity Proceed to step 4.
and all other terminals
in connector CM-C11
(WP 0012, Figure 31).
4. Using digital multimeter
Continuity Replace basic engine
(WP 0540), test for continuity
wiring harness (WP 0251).
between connector CM-C1
Proceed to Test Step 13.
terminal 40 (WP 0012, Figure 30)
No Continuity Proceed to step 5.
and all other terminals
in connector CM-C1
(WP 0012, Figure 30).
5. Using digital multimeter
Continuity Replace basic engine
(WP 0540), test for continuity
wiring harness (WP 0251). Replace
between connector CM-C1
engine interface wiring harness
terminal 40 (WP 0012, Figure 30)
(WP 0211).
and all terminals in connector CL-
Proceed to Test Step 13.
C1 (WP 0012, Figure 45).
No Continuity Replace engine ECM
(WP 0252).
Proceed to Test Step 13.
0021-6