TM 9-4940-568-34
5-149
(5)
Install assembled shift lever (34) and drive
shaft and clutch group (25) in drive housing
(12) and align the holes in drive shaft
support (41) with those in drive housing.
(6)
Ensure drive shaft support (41) is fully
seated in drive housing (12) and drive shaft
bearing (42) remains fully seated in drive
shaft support.
(7)
Install shift lever screw (33), shift lever
washer (32), and shift lever nut (31).
Tighten shift lever nut to 40 lb-in
(4.5 N.m).
(8)
If used, install plate (30) and drive housing
plug (29) in drive housing (12).
NOTE
Install washers as noted during
removal.
(9)
Install fiber washer(s) (26), thin washer(s)
(27) and thick washer(s) (28).
(10)
Install armature support bracket (24) on
drive housing (12) and align together using
aligning marks made during disassembly.
(11)
Secure armature support bracket (24) and
drive housing (12) together with long drive
housing bolt (22) and short drive housing
bolt (23). Tighten long drive housing bolt
and short drive housing bolt to 75 lb-in (8.5
N.m).
29
30
34
31
32
12
33
25
26
27
28
22
24
23
41
42