TM 9-4940-568-34
3-35
(14) Attach lifting device to outer beam (5)
and remove all slack from lifting device.
(15) Remove eight screws (25) and two
plates (26) from base (27).
(16) With help from assistant, remove outer
beam (5) from base (27) and lower onto
wooden block.
b. Installation
(1) Attach lifting device to outer beam (5).
(2) Raise outer beam (5) with lifting device
so that the end alines with base (27).
(3) Slide outer beam (5) into the base (27)
with help from assistant as needed.
NOTE
Ensure plates are installed in
their original locations.
(4) Apply sealing compound to threads of
eight screws (25) and install two plates
(26) in base (27) with screws (25).
25
26
27
5
