TM 9-4940-568-34
3-31
b. Cleaning/Inspection
(1) Clean all parts.
(2) Inspect all parts.
(3) Replace all parts failing inspection.
c. Installation
WARNING
Be sure to wear safety glasses
when servicing hydraulic
system.
CAUTION
Bottom of cylinder must be
supported during installation.
NOTE
Steps are the same for left or right
jack cylinders, left side shown.
(1) With the aid of an assistant, install
cylinder (5) through top of barrel (14).
(2) With the aid of an assistant, install
cylinder (5) to barrel (14) using pin (16)
and two cotter pins (15).
(3) Install cover plate (13) on barrel (14)
using four washers (12), lockwashers
(11) and screws (10).
(4) Install adapter (9) and elbow (8) on
cylinder (5).
(5) Install preformed packing (7) and hose
(6) on elbow (8).
10
11
12
13
14
6
7
8
9
5
16
15
14
5
