TM 9-2330-389-14&P
4-26.
PARKING BRAKE CABLE REPLACEMENT (Con't).
b.
INSTALLATION
1.
Install plain nut (10) about halfway on parking brake cable (4). Install parking brake cable (4) in clevis (11).
Tighten nut (10).
2.
Install parking brake cable (4) on parking brake cable retainer strap (12) and position in place under trailer (9).
3.
Install two plain nuts (7).
4.
Push parking brake cable (4) through backing plate (6). Hook parking brake cable (4) to parking brake lever (5).
5.
Install two loop clamps (3) on parking brake cable (4). Position two loop clamps (3) and parking brake cable (4) in
place and secure with two flat washers (2) and capscrews (1).
FOLLOW-ON TASKS:
Install brakedrum (para 4-32).
Install tire assembly (para 4-28).
Adjust parking brake handle (refer to TM 9-2330-205-14&P).
4-27.
BLEEDING HYDRAULIC BRAKE SYSTEM.
NOTE
If pressure bleeder is not available, connect to air brake system of prime mover
having an air brake system.
Perform this task in accordance with TM 9-2330-205-14&P.
4-32
