TM 9-2330-389-14&P
4-26.
PARKING BRAKE CABLE REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
Tire assembly removed (para 4-28).
General mechanic's tool kit
Brakedrum removed (para 4-32).
NOTE
The M200A1 Tracked Suspension has two parking brake cables. Use this task to
replace either the left or right parking brake cable.
a.
REMOVAL
1.
Remove two capscrews (1), two flat washers (2), and loop clamps (3) from parking brake cable (4).
2.
Unhook parking brake cable (4) from parking brake lever (5). Pull parking brake cable (4) out of backing plate (6).
3.
Remove two plain nuts (7) and parking brake cable retainer strap (8) from trailer (9).
4.
Loosen plain nut (10) on parking brake cable (4). Remove parking brake cable (4) from clevis (11). Remove
plain nut (10) from parking brake cable (4).
4-31
