TM 9-2330-389-14&P
4-25.
HYDRAULIC LINES, HOSES, AND FITTINGS MAINTENANCE (Con't).
4.
Bend new tube (13) into shape using bending toot and old tube as a guide. Discard old tube.
5.
Install two flared nuts (16) on tube assembly (11) so that flared ends face outward.
6.
Double-flare both ends of tube assembly (11) using double-flaring tool.
d.
INSTALLATION
1.
Position frame tee assembly (9) in place on frame group (13) and install capscrew (14) and flat washer (15).
2.
Position frame tube assemblies (10 and 11) in place on frame group (13). Connect ends of frame tube
assemblies (10 and 11) to frame tee assembly (9) and hydraulic wheel cylinders (12).
CAUTION
To prevent damage to brake hose assembly, position brake hose assembly so it
clears track blocks.
3.
Install hose assembly (3) in frame tee assembly (9) and axle bracket (8) so that hose assembly (3) clears track
blocks. Install new self-locking nut (7).
4.
Position multiple connector (2) on cross axle (6) and install capscrew (4) and flat washer (5).
5.
Connect cross axle tube assembly (1) to multiple connector (2) and hose assembly (3).
FOLLOW-ON TASKS:
Bleed brakes (para 4-27).
4-30
