TM 5-3895-376-14&P
4-21. TRANSPORT DOLLY MAINTENANCE INSTRUCTIONS - Continued
g. Clean parts to be reinstalled with cloth damp-
f.
Remove rubber spring element (19) from
ened with cleaning solvent and dry thor-
bracket.
oughly.
WARNING
h.
install capscrew (9) with flat washer (10) into
rubber spring element (19).
P-D-680, Type III, Is moderately toxic to
the skin, eyes and respiratory tract;
i.
Seat the rubber spring element into bracket
avoid prolonged exposure. Skin and
(7) and position bracket up under the guide
eye protection is required. Good ventila-
bar so that threads of capscrew (9) extend to
tion is required. Do not use near open
the right side of plate compactor. Secure
flame or excessive heat. Flash point is
bracket with two capscrews (16, 17), flat
200 degrees F (93.3 degrees C).
washers (18), lockwashers (15) and nuts (14).
4-33