TM 5-3825-230-14&P
5-30.
FUEL INJECTOR ASSEMBLY REPLACEMENT (CONT).
c.
Installation.
(1)
Install copper washer (4) and injector assembly (3).
NOTE
Be sure to line up locating pin on flange with locating hole on top of injector assembly.
(2)
Install flange (2) and two nuts (1). Tighten to 66 lb-in (7.4 N•m) using a torque wrench and 10 mm open end
wrench.
NOTE
Follow-on maintenance: Install fuel lines (para 4-45 and 4-46)
END OF TASK
5-68
