TM 5-3825-230-14&P
5-31.
FUEL INJECTOR NOZZLE ASSEMBLY SERVICE (CONT).
(3)
Measure opening of injector nozzle using
calipers, it should be 0.0110 in. (0.28 mm).
(4)
If any parts are damaged or lost, replace fuel
injector assembly.
c.
Assembly.
(1)
Install washer (10), spring (9), spacer (8), cap
(7), pin (6), and nozzle (5) on injector (3).
(2)
Install nozzle holder (4) onto injector body (3),
tighten using a 19 mm open end wrench.
(3)
Install copper washer (2) and tube fitting (1) on
injector body (3) using a 14 mm open end
wrench.
NOTE
Follow-on maintenance: Install fuel
injector assembly (para 5-30)
END OF TASK
5-70
