TM 5-3825-230-14&P
5-30.
FUEL INJECTOR ASSEMBLY REPLACEMENT.
This task covers:
a.
Removal
b.
Cleaning/Inspection
c. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
TM or Para
Condition Description
Para 4-45 and 4-46
Fuel lines removed.
Materials/Parts
Copper washers
a.
Removal.
WARNING
Fuel is very flammable and can explode easily. To avoid serious injury or death, keep fuel away
from open fire and keep fire extinguisher within easy reach when working with fuel. Do not work
on fuel system when engine is hot. Fuel can be ignited by hot engine. When working with fuel,
post signs that read NO SMOKING WITHIN 50 FEET (15.24 m) of vehicle.
(1)
Remove two nuts (1) and flange (2) using a 10 mm open end wrench.
(2)
Remove injector assembly (3) and copper washer (4).
b.
Cleaning/lnspection. Measure opening in injector nozzle using calipers. Opening should be 0.0110 (0.28 mm)
in diameter.
5-67
