TM 5-3825-230-14&P
4-74. FUSE AND HOLDER REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
TM or Para
Condition Description
Para 4-73
Battery cables
Materials/Parts
disconnected.
Locknuts
a. Removal.
WARNING
Be careful not to short out battery
terminals. Do not smoke or use
open flame near batteries. Batteries
may explode from a spark. Battery
acid is harmful to skin and eyes.
NOTE
Right and left side batteries are
positioned differently but removed
the same way.
(1)
Remove two locknuts (1), two washers (2), and
bracket (3) using a 7/16 in. open end wrench.
(2)
Note placement of terminals and lift out battery
(4).
b. Installation.
(1)
Position battery (4) in battery box (5) with
terminals in proper position.
(2)
Secure battery using bracket (3), two locknuts
(1), and two washers (2). Tighten locknuts using
a 7/16 in. open end wrench.
NOTE
Follow-on maintenance: Connect battery cables (para 4-73)
END OF TASK
4-112
