TM 5-3825-230-14&P
4-71. CENTER LIGHT AND MOUNT REPLACEMENT.
This task covers :
a.
Removal
b.
Installation
INITIAL SETUP
Tools
Materials/Parts
Tool Kit, General Mechanic's: Automotive
Lockwashers
NOTE
Ensure wire harness (12V or 24V) to tow vehicle is disconnected.
a. Removal
(1)
Unplug wire (1) from connector (2).
(2)
Remove four screws (3), four lockwashers (4), ground wire (5), and bracket (6) from frame (7) using
a flat tip
screwdriver.
(3)
Remove three lamps (8) from bracket (6).
b. Installation.
(1)
Install three lamps (8) in bracket (6).
(2)
Position bracket (6) and install ground wire (5), four lockwashers (4), and screws (3) using a flat tip screwdriver.
(3)
Connect wire (1) to connector (2).
END OF TASK
4-107
