TM 5-3825-230-14&P
4-72. FUSE AND HOLDER REPLACEMENT.
This task covers:
a.
Removal
b.
Cleaning/Inspection
c. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
TM or Para
Condition Description
Para 4-73
Battery cables
Materials/Parts
disconnected.
Lockwasher
Gasket
Compound, sealing, item 15 Appendix E
Solvent, dry cleaning, item 31 Appendix E
a. Removal.
WARNING
Fuel is very flammable and can
explode easily. To avoid serious
injury or death, keep fuel away from
open fire and keep fire extinguisher
within easy reach when working with
fuel. Do not work on fuel system
when engine is hot. Fuel can be
ignited by hot engine. When working
with fuel, post signs that read NO
SMOKING WITHIN 50 FEET (15.24 m)
of vehicle.
(1)
Remove nut (1) and lockwasher (2) using a 3/8
in. open end wrench.
(2)
Disconnect wire (3).
(3)
Remove five screws (4) using a flat tip
screwdriver.
(4)
Lift sending unit (5) out of fuel tank (6).
(5)
Remove gasket (7) from tank (6) using a putty
knife. Discard gasket.
4-108
