TM 5-3825-230-14&P
4-76. TOW VEHICLE TO JUNCTION BOX WIRE HARNESS (12V) REPLACEMENT/REPAIR.
This task covers:
a.
Removal
b.
Repair
c.
Installation
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
TM or Para
Condition Description
Para 4-66
Junction box cover
Materials/Parts
removed.
Lockwashers
Star washers
Tags, identification, item 35 Appendix E
NOTE
• Ensure the wiring harness (12V or 24V)
to tow vehicle is disconnected.
• Refer to Appendix H for electrical
schematic.
a. Removal
(1)
If stowed, unwrap 12V wiring harness from
harness stowage pegs.
(2)
Remove three nuts (1), three lockwashers (2),
three washers (3), and three clamps (4) from
front boom (5) using a ratchet and 7/16 in.
socket.
(3)
Remove screw (6), washer (7), nut (8),
lockwasher (9), clamp (4), and red wiring
harness (10) from front boom (5) using a
ratchet, 7/16 in. socket and 7/16 in. open end
wrench.
4-114
