TM 5-3825-230-14&P
4-76. TOW VEHICLE TO JUNCTION BOX WIRE HARNESS (12V) REPLACEMENT/REPAIR (CONT).
(3)
Install harness (10), three clamps (4), three nuts
(1), three lockwashers (2), and three washers (3)
on front boom (6) using a ratchet and 7/16 in.
socket.
(4)
Install clamp (4), screw (6), washer (7),
lockwasher (9), and nut (8) using a ratchet, 7/16
in. socket and 7/16 in. open end wrench.
(5)
Wrap unused 12V wiring harness around
harness stowage pegs.
NOTE
Follow-on
maintenance:
Install
junction box cover (para 4-66)
END OF TASK
4-116
