TM 5-3825-230-14&P
4-78. BROOM HOOD WIRING HARNESS/CONDUIT REPLACEMENT/REPAIR.
This task covers:
a.
Removal
b.
Repair
c.
Installation
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
TM or Para
Condition Description
Para 4-66
Junction box cover
Materials/Parts
removed.
Lockwashers
Star washers
Adhesive, PVC, item 1, appendix E
Primer, PVC, item 28, appendix E
Tags, identification, item 35 appendix E
Conduit (See Appendix G for fabrication)
NOTE
• Ensure the wiring harness (12V or 24V)
to tow vehicle is disconnected.
• Refer to Appendix H for electrical
schematic.
a. Removal.
(1)
Remove 10 screws (1), 10 lockwashers (2), 10
washers (3), and 10 conduit clamps (4) from
hood (5) using a flat tip screwdriver.
(2)
Disconnect two connectors (6) from front lights
(7).
(3)
Disconnect pigtail connector (8) and remove
hood wiring conduit assembly (9) from front
hood (5).
4-120
