TM 5-3825-230-14&P
NOTE
Tag and mark all wires prior to removal to aid in installation.
(4)
Remove seven nuts (11), seven star washers (12), and tag and remove seven wires (13) from terminal block (14)
in junction box (15) using a 3/8 in. socket and drive.
(5)
Remove knurled nut (16) and harness (10) from junction box (15).
b. Repair. Repair of the 12V wire harness consists of replacing damaged terminals (para 4-83). Refer to the electrical
schematic, Appendix H, for cable lead diagram.
c. Installation.
(1)
Install harness (10) in junction box (15) using knurled nut (16). Tighten using split jaw pliers.
(2)
Install seven wires (13), seven nuts (11), and seven star washers (12) using a 3/8 in. socket and drive.
4-115
