TM 5-3805-296-23-6
0374
CRANKCASE PLATE INSTALLATION CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may result in injury or death to personnel.
NOTE
Crankcase plate weighs approximately130 lb (59 kg).
2. With assistance, position crankcase plate (Figure 9, Item 1) on transmission jack (Figure 9, Item 4).
3. With assistance, using transmission jack (Figure 9, Item 4), install crankcase plate (Figure 9, Item 1) on
retaining brackets (Figure 9, Item 5).
4. Using transmission jack (Figure 9, Item 4), raise crankcase plate (Figure 9, Item 1) to machine.
5. Install six bushings (Figure 9, Item 2) and bolts (Figure 9, Item 3) on crankcase plate (Figure 9, Item 1).
6. Remove transmission jack (Figure 9, Item 4) from crankcase plate (Figure 9, Item 1).
Figure 9. Crankcase Plate.
0374
END OF TASK
