TM 5-3805-296-23-6
0373
REMOVAL CONTINUED
NOTE
When removing lockring from wheel, begin prying lockring at split.
33. Using two lockring bars and with assistance, remove lockring (Figure 9, Item 7) from wheel
(Figure 9, Item 2).
34. Using screwdriver, remove O-ring (Figure 9, Item 6) from wheel (Figure 9, Item 2). Discard O-ring.
35. Rotate handle (Figure 9, Item 4) counterclockwise to release flange (Figure 9, Item 5).
36. Remove handle (Figure 9, Item 4) and two spacers (Figure 9, Items 14 and 15) from threaded rod
(Figure 9, Item 13).
37. Loosen two thumbscrews (Figure 9, Item 11) and remove two extension legs (Figure 9, Item 12) from
crossmember (Figure 9, Item 10).
38. Remove crossmember (Figure 9, Item 10) from threaded rod (Figure 9, Item 13).
39. Remove two bolts (Figure 9, Item 9), washers (Figure 9, Item 8), and center bar (Figure 9, Item 3) from wheel
(Figure 9, Item 2).
40. Install two washers (Figure 9, Item 8) and bolts (Figure 9, Item 9) on wheel (Figure 9, Item 2).
Figure 9. Lockring and O-ring.
0373