TM 5-3805-296-23-5
0340
INSTALLATION
000340
WARNING
Wheels must remain chocked during entire procedure. Failure to follow this warning may
result in injury or death to personnel.
NOTE
Install wiring harness as tagged and marked during removal.
1. Install rear quick-release holding valve (Figure 4, Item 4), two washers (Figure 4, Item 5), and bolts
(Figure 4, Item 3) on mounting bracket (Figure 4, Item 6).
2. Connect push frame wiring harness connector (Figure 4, Item 1) to air pressure sensor wiring harness
connector (Figure 4, Item 2).
Figure 4. Rear Quick-Release Holding Valve.
0340