TM 5-3805-296-23-5
0340
REMOVAL CONTINUED
NOTE
Tag and mark wiring harness to aid in installation.
4. Disconnect push frame wiring harness connector (Figure 2, Item 1) from air pressure sensor wiring harness
connector (Figure 2, Item 2).
5. Remove two bolts (Figure 2, Item 3), washers (Figure 2, Item 5) and rear quick-release holding valve (Figure 2,
Item 4) from mounting bracket (Figure 2, Item 6).
Figure 2. Rear Quick-Release Holding Valve.
0340
END OF TASK